Products

 

Your location:Home>led lighting aging line - Energy-saving lamp assembly line Energy-saving lamp assembly line

LED Aging line

LED Aging line

Browse number:3156       

  • Detailed
I. Item: LED lights aging line
Second, the specification: L10000 × W2260 × H740mm
Third, the number of: 1
※ structure: The chain conveyor, flat placing small trolley type, frequency control. It consists of: Basic line body, conductive tracks, loading trolleys, electrical control components.
※ loop line body length: L = 24000㎜, wherein the means for employees to take a job loading zone L = 2000 mm.
a) at room temperature and high temperature environments, at different constant voltage, peak alternating voltage, under constant beat of surge voltage LED lighting products to achieve aging.
b) Design Yield: 80 street / week, calculated in accordance with 120 minutes a week of aging. Voltage detection range: AC: 12V-300V.
 c) The aging lines on the lower cycle of aging, aging is set to: Start at room temperature, low pressure atmospheric aging → → → high-pressure high-temperature low-pressure shock aging → HTHP aging → → roaming simulate aging temperature and pressure mains detection → atmospheric aging close light district.
d) independent electrical control cabinet, the whole machine with 7-inch man-machine interface, PLC aging control systems, PLC controls the roaming voltage detection / impact detection / temperature switch / aging run time setting / districts aging voltage. Voltage, beat calibration safe and convenient.
Fourth, Production notes:
1. Power: Germany Sen brand 2.2kw / 380V inverter speed, east-licensing 2.2KW / 380v motor, WPEO100 type 1: 250 Cazenove brand reducer, a line speed of 0-3m / min adjustable
2, frame: the use of 40 × 40 square pass welding production, feet adjustable galvanized foot cups. Both sides of the line of body care side adopt specifications for 23㎜ × 130 mm aluminum production line laid along the body.
3, the set of vehicles: All lampholder wires are used 0.5㎡ GB high temperature lines. Each small trolley installation zero, FireWire conductive copper brush all the way; aging trolleys divided into two layers, size: W500 * L800 * H80 * H500mm; LED lights aging small car panel with 1.5mm cold plate bending molding Each small trolley 2 sets of lights can be simultaneously aging (upper and lower set) and two sets of tunnel lights (up and down each one). . Each lamp maximum power of 200W each small trolley installation zero, FireWire conductive brush each lead the way, disconnecting switch sets; aging across the board a total of 32 small trolley.
4, trolley configuration: conductive copper using a reliable contact slider, fixed on the carrier pipe small trolley. Each small car three, namely ground zero, FireWire. Each car is equipped with a high sensitivity and overload fuse breaker. Each car bottom with two high-temperature nylon casters, trolleys run with one side hanging on the chain line on the traction chain body of the pin.
5, transport chain: C2062t = 38.1 small long-shaft roller chain. Line 22 m chain, track the use of 3 mm cold plate bending paint production, to ensure smooth operation and reduce operating noise.
6, the conductive configuration: use of copper and stainless steel conductor rail conductive slider way, the middle line of the body is provided with a three-conductive tank, conductive tracks made of stainless steel. Trolley conductive using copper slider. Slot insulation board with conductive epoxy plate, ensure good insulation effect.
7, AC voltage: the low pressure zone: 15KW0-250V self-coupling voltage regulator a voltage configurations: 85V / 110V / 130V / 175V
                Atmospheric area: 15KW0-250V self-coupling voltage regulator 2 Voltage configuration: 220V / 240V
                High pressure area: 15KW0-300V self-coupling voltage regulator 2 Voltage configuration: 250V / 265V / 275V
 A total of some 2 meters across the board no voltage operating area. Workers installed convenient to take action.
8, stop protection: the beginning and end of each line with a set of safety stop switch to prevent accidental emergency.
9, the light shielding plate: aluminum support intermediate inlaid brown organic board, effective isolation lamp light, does not operate worker eye injury.